Accessory
Hiwonder
IMU Inertial Navigation Module ROS1/ROS2 Robot MEMS USB Magnetometer 10-axis ARHS Posture Sensor
- 【High-performance three-dimensional motion and posture measurement system】The IM10A inertial navigation module includes a 3-axis electronic gyroscope + 3-axis accelerometer + 3-axis magnetometer + barometer (angle + altitude), combined with a high-dynamic Kalman filter fusion algorithm to provide users with high-precision, high-dynamic, real-time compensation 3-axis posture angle data.
- 【Rich data output】The IM10A inertial navigation module can output Euler angles (Roll, Pitch, Yaw), quaternions, position, speed, acceleration, angular velocity, and magnetic field vectors. It can provide output frequency up to 200Hz in real time, thus greatly reducing the research and development time for various needs.
- 【Supports multiple communication methods】 Supports USB/UART/I2C communication methods, is more efficient and compatible with Raspberry Pi, STM32, and Jetson series development boards, providing more development possibilities for DIY makers.
- 【Provide rich tutorial materials】 Hiwonder provides a wealth of tutorial materials, such as PC software, operating instructions, development manuals, development codes, source codes, etc.
- USB3.0 high-speed transmission up to 5120Mbps
- No driver required, plug and play
- Compatible with Win7/8/10, Linux, MacOS and Ubuntu
- Applicable to ROS robot/car, Raspberry Pi and Jetson series boards
- Support various peripherals connection
Hiwonder
NVIDIA HD Camera 160° 800W Pixel IMX219 CSI Interface Compatible with JETSON NANO/Xavier NX/TX2 NX
- Use Sony IMX219 chip and CSI interface
- 160° field of angle and 800W pixels
- Compatible with Jetson Nano 2GB/4GB (B01/ALT)/ Jetson Xavier NX (B01/ALT)/ Jetson TX2-NX
- Free camera acrylic holder is provided
- Support 5G/2.4G dual-band WiFi
- Support Bluetooth and WiFi dual modes
- Plug to use without driver
- Transmission speed up to 867M
- Compatible with Jetson Nano 4GB
Hiwonder
STL-19P D500 Lidar Developer Kit 360 Degrees DTOF Laser Scanner Support ROS1 ROS2 Raspberry Pi Jetson Nano
- Long service time of 10000h
- 30000lux resistance to strong light
- Distance measurement up to 12m radius
- 360° all-round laser scanning
- Compatible with ROS1 and ROS2 systems
Hiwonder
Fan Module: Hiwonder Robot Module Compatible with Arduino/ Raspberry Pi/ Jetson Nano/ micro:bit
- Working voltage: DC 5V
- Max working current: 125mA
- Size: 48mm×48mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Support Raspberry Pi 4B/3B
- Support Jetson Nano
- 16GB/32GB/64GB/ Jetson Nano
Accessory
Micro-HDMI to HDMI Adapter Cable for Raspberry Pi 4B 1.5M 4K Data Transfer Display Connector Wire
- Used for Raspberry Pi 4B
- Micro-HDMI to HDMI transfer cable
- Pay attention to the direction of the interface