- +86 18825289328
- support@hiwonder.com
- Home
- Servo & Controller
- Hiwonder LX-225 Serial Bus Servo/25KG High Torque/Data FeeDback Hiwonder LX-225 Serial Bus Servo/25KG High Torque/Data FeeDback
- Upgraded Version -Three Channels on the top, left and right are easy for wiring.
- Large Torque - Maximum torque is up to 25kg.cm 7.4V. 270 degree rotation. 360 degree rotation when power-off, perfect for robot joint activities.
- Variable ID -The default number is 1 which is modifiable. It can be used to replace xArm ID5 servo.
- Details Tutorial - Provide bus servo communication protocol, Provide for Arduino and STM32 source code.
- Dimensions -1.57 x 0.79 x 2.01inch (40 x 20.14 x 51.1mm); Weight: 63g (2.22oz) only.
- Description
- Specifications
- Accessories
Product Description
LX-225 servo is a full metal gearserial bus servo with three connectors. The servo can be connected in series, simplifying the wire connection.It can provide temperature, position feedback. LX-225 servo can be used in different bionic robot joints.
Packing List
- 1*LX-225 servo
- 1*Plastic main servo horn
- 1*Plastic assistant servo horn
- 1*Servo wire(200mm)
- 1*Screw package
Weight | 63g |
Size | 40x20.14x51.1mm |
Working voltage | 6-8.4V |
Speed | 0.20sec/60°7.4V |
Torque | 25kg.cm 7.4V |
Rotation | 0-240° |
No-load current | 100mA |
Stall Current | 2.4~3A |
Servo accuracy | 0.3° |
Control method | UART serial command |
Communication baud rate | 115200 |
Storage | Save data when the power off |
Servo ID | 0~253 for user setting, ID 1 is default |
Angel read back function | Support |
Protection | Avoid stalling and overheat |
Data feedback | Temperature, Voltage, Position |
Working mode | Servo mode and deceleration motor mode |
Control angle range | 0-1000, correspond to 0-240 |
Wire | 200mm |
Gear | Metal |
Bus Servo Communication
The user can set and assign an ID number to each servo, and use the controller to issue instructions to make the servo perform actions according to the instructions.
High Torque and Strong Power
The servo has a maximum torque of 25kg.cm 7.4V, which is powerful and gives your robot plenty of power.
High Quality Potentiometer
The servo adopts a high-precision potentiometer, which improves the accuracy and linearity, makes the operation more stable and prolongs the service life.
Intelligent Feedback and Two Working Modes
The servo supports servo mode and reduction motor mode, and has position, temperature and voltage feedback to protect the normal operation of the servo.
Item | Specification |
Weight | 63g |
Size | 40*20.14*51.1mm |
Working voltage | 6-8.4V |
Speed | 0.20sec/60°7.4V |
Torque | 25kg.cm 7.4V |
Rotation | 0-240° |
No-load current | 100mA |
Stall Current | 2.4~3A |
Servo accuracy | 0.3° |
Control method | UART serial command |
Communication baud rate | 115200 |
Storage | Save data when the power off |
Servo ID | 0~253 for user setting, ID 1 is default |
Angel read back function | Support |
Protection | Avoid stalling and overheat |
Data feedback | Temperature, Voltage, Position |
Working mode | Servo mode and deceleration motor mode |
Control angle range | 0-1000, correspond to 0-240 |
Wire | 200mm |
Gear | Metal |
I put this on my 1:10 scale Axial crawler. It works really well, and I don't notice any change in how my steering works compared to the more expensive one I had before. Installing it was easy, and I'm happy with how it turned out.
This servo is doing a good job. It's on my rover and manages a front sensor for SLAM. The wiring and commands are normal, and I had no problems setting it up. Everything I needed was included, and I got it working quickly. I'm really happy with this little servo overall!
This is great high torque service. It gets the job done lifting a robotic arm just fine!
Simple wiring. Detail tutorial is provided so that i can install the servo easily. Probably faster than I need and certainly has much more torque. I absolutely recommended this servo regardless of whether you’re on a budget or not.
This a trusted brand. It has worked flawlessly for two months. They're super powerful when supply with a power voltage range of 6-8.4V . I have never had a problem. I will definitely be getting more.