Sensor
- Working voltage: DC 5V
- Port type: 5264-4AW
- Size: 50 x 20 mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Temperature measurement range: -40℃ ~ +85℃
- Humidity measurement range: 0 ~ 99.9%RH
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
Sensor Module
Hiwonder Ultrasonic Module Detection Distance Sensor Compatible with Arduino micro:bit Programming
- Working voltage is 5V and the current is 2mA
- Detection angle is 15°
- Ranging distance is 2cm-400cm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
Sensor Module
Soil Moisture Sensor Module Detector Soil Hygrometer Detection Module Detection Depth for Arduino UNO
- Working voltage is 5V
- AD converter digits is 10 digits
- AD value: 0~400 (dry soil); 400~800 (moist soil); 800~950 (in the water)
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
Sensor Module
Raindrop Sensor for Automatic Watering System Compatible with Arduino/ micro:bit/ Raspberry Pi
- Working voltage is 5V
- AD converter digits is 10 digits
- AD value: 0~400 (no rain environment); 400~1000 (rainy environment)
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Built-in high definition screen
- Dedicated AI Chip Faster Response
- Compatible with Lego blocks
- Available for Hiwonder Microbot robot car
- 21 keys micro-remote controller
- Powered by CR2025 battery
- Support Hiwonder Qbot, Qbit, Spiderbot, Tonybot and xArm2.0
- Glowing RGB light color can be changed
- Compatible with expansion boards
- Support LEGO DIY
- High sensitivity for robot car DIY
- Easy wiring with 4PIN connector
- Holes on the module are compatible with LEGO for DIY
- Provide detailed learning tutorials
- 4-way tracking with high sensitivity
- 4PIN connector for easy wiring
- Compatible with LEGO
- Working voltage: DC 5V
- Working current: 5mA
- Size: 50 × 20 mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Port type: 5264-4AW
- Size: 50 × 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Working current: 15mA
- Measurement distance: 2cm ～ 400cm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Working current: 5mA
- Size: 50mm x 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Working current: 40mA
- Effective detection range: 2 ~ 25cm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Voltage: DC 5V
- Current: Max 100mA
- Recognizable distance: 2~100mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks