Sensor Module
- 4-way tracking with high sensitivity
- 4PIN connector for easy wiring
- Compatible with LEGO
- Working voltage: DC 5V
- Accelerometer measurable range: ±2, ±4, ±8, ±16g
- Gyroscope measurable range: ±250, ±500, ±1000, ±2000°/ second (dps)
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Bluetooth version: 4.0
- Baud rate: 9600
- Compatible with Hiwonder 24-ch servo controller
- No wiring required. Direct connection.
- Voltage: DC 5V
- Current: Max 100mA
- Recognizable distance: 2~100mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Port type: 5264-4AW
- Size: 50 × 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- MCU control
- Display module 16*8 dot matrix
- Compatible with LEGO for DIY
- Working voltage: DC 5V
- Non-working current: 3mA
- Max working current: 125mA
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Glowing RGB light color can be changed
- Compatible with expansion boards
- Support LEGO DIY
- Rated voltage: DC 6V
- Rated current: <420mA
- Maximum vacuum: > -350mmHg
- Freely control the adsorption of objects
- Working voltage: DC 5V
- Working current: 300mA
- Size: 500 x 10mm
- Composed of 15 programmable LED lights
Sensor Module
Hiwonder Ultrasonic Module Detection Distance Sensor Compatible with Arduino micro:bit Programming
- Working voltage is 5V and the current is 2mA
- Detection angle is 15°
- Ranging distance is 2cm-400cm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- Working current: <10mA
- Measuring range: 3 - 14 V
- Maximum input: 14V
- Rapid and synchronous voltage display
- 3 Pin wire port. Connecting wire is provided. Easy to connect
- Working voltage is 5V
- Water speed is adjustable
- Cylindrical side diameter is 23mm
- Water pipe is 100cm
- Built-in high definition screen
- Dedicated AI Chip Faster Response
- Compatible with Lego blocks
- Available for Hiwonder Microbot robot car
- Working voltage: DC 5V
- Working current: 40mA
- Effective detection range: 2 ~ 25cm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Receiving distance: 10 - 15m
- Receiving angle: ±35°
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks