% $-17.99
- High accuracy performance
- Three Ports for Connection
- Support temperature/voltage/position
- Provide 51, Arduino, STM32, Raspberry Pi source code
Available:
Only 991 items in stock
In stock
In stock
Out of stock
Back in stock
$17.99
Feature
- Support temperature, voltage and position feedback
- Provide 51, Arduino, STM32, Raspberry Pi source code
- Three connectors for easy wiring
- Working modes are servo mode and deceleration motor mode
Clean Wiring
There are 3 ports for you to connect which makes the project have clean wiring and beautiful outlook.
Servo Debugging System
In Debugging system, you can set ID number, working mode, rotation speed, position deviation, LED light, temperature alarm and voltage alarm for servos.
Packing List
1* LX-1501 serial bus servo
1* servo horn kit
1* servo horn kit
| Item | Specification |
| Weight | 58g |
| Size | 54.38*20.04*45.5mm |
| Working voltage | 6-8.4V |
| Speed | 0.16sec/60°7.4V |
| Torque | 17kg.cm 7.4V |
| Rotation | 0°-240° |
| No-load current | 100mA |
| Stalled current | 2.4-3A |
| Accuracy | 0.3° |
| Angler range control | 0~1000 correspond (0°~240°) |
| Control method | UART serial command |
| Communication baud rate | 115200 |
| Save setting | save data when the power off |
| Servo ID | 0~253 for user setting, ID 1 is default |
| Data feedback | temperature/voltage/position/angle |
| Working mode | servo mode and deceleration motor mode |
| Gear | metal |
| Default wire | 20cm (7.9inch) in length |
| Connector | PH2.0-3P |
| Packing list | 1*LX-1501 servo 1*servo horn kit |
