All Products
- Long service time
- Support graphical programming
- Equipped with plenty of modules
- Use micro:bit + micro:bit Expansion board
- Various control and programming methods
- Serial bus servo connector to connect the servo one by one
- High-precision potentiometer to feedback the angle position
- Equipped with position/temperature/voltage feedback
- Support two working mode: Servo mode and Gear motor mode
- 20KG large torque.Dual ball bearing
Bus Servo
Hiwonder LX-824 Intelligent Three-Connectors Serial Bus Servo with Powerful Feedback Functions
- Serial bus servo connector to connect the servo one by one
- High-precision potentiometer to feedback the angle position
- Equipped with position/temperature/voltage feedback
- Support two working mode: Servo mode and Gear motor mode
- 17KG large torque.Dual ball bearing
Bus Servo
Hiwonder LX-15D Intelligent Serial Bus Servo with RGB Indicator for Displaying Robot Status
- Torque for LX-15D servo: 15 kg/cm (208 oz/in) 6V; 17 kg/cm (236 oz/in) 7.4V
- TTL / USB tester board is a servo debugger, which is able to connect the servo to the PC software or other devices and use them to adjust the parameter of servos
- Bus servo controller can be used in serial servo control and it can combine with PS2 wireless handle to realize servo remote control
- Details Tutorial: Provide bus servo communication protocol, 51 Arduino and STM32 source code
- Powerful PS2 signal receiver
- Simply designed button and remoter
- Support robotic arm and humanoid robot control
- Only compatible with Hiwonder channel servo controllers
- 【High Precision & Adjustable Speed Servo Tester】CPU uses a high-performance STM32 microcontroller with ARM Cortex-M3 core to control 16-channel servo movement with high precision and adjustable speed. With signal isolation protection, the servo output is isolated from the CPU to avoid servo current surge damage to the CPU.
- 【16-channel Intelligent Servo Controller】Support serial communication, the 16-channel servo controller can communicate with other microcontrollers through TTL-level serial communication, and other microcontrollers can send commands to the control board. So that your robot can realize intelligent control, you can play sound control, body sensing, tracking, light chasing, and obstacle avoidance with it.
- 【With Over-current Protection】Simple wiring. Built-in switch, easy to use, reduces wiring troubles. All 8-channel servo ports have over-current protection! It greatly prevents the servo from being burnt out due to block.
- 【Large Capacity Memory】16M large capacity memory, enough for your use. Can hold 230 action groups, each action group can hold 510 actions.
- 【2 Control Modes】Support online debugging, no need to install a driver. Support two offline running modes, you can run offline for 1 time or cycle offline countless times.
- Highly Compatible with Arduino UNO
- Onboard 16-Channel 4Pin Port
- Onboard 2-Channel PWM Port
- Able to Connect 3 Wire Sensor
Sensor Module
Digital Tube Module: Hiwonder Robot Module Compatible with Arduino/ Raspberry Pi/ Jetson Nano/ micro:bit
- Working voltage: DC 5V
- Port type: 5264-4AW
- Size: 50 × 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Working current: 5mA
- Size: 50 × 20 mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
Sensor Module
RGB Module: Hiwonder Robot Module Compatible with Arduino/ Raspberry Pi/ Jetson Nano/ micro:bit
- Working voltage: DC 5V
- Working current: 50mA
- Size: 50 × 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Port type: 5264-4AW
- Size: 50 × 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Working current: 15mA
- Measurement distance: 2cm ~ 400cm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Working current: 5mA
- Size: 50mm x 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Working current: 40mA
- Effective detection range: 2 ~ 25cm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Voltage: DC 5V
- Current: Max 100mA
- Recognizable distance: 2~100mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Receiving distance: 10 - 15m
- Receiving angle: ±35°
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks